Product description

Simple planning with our examples connection plans

Would you like to measure up to 1,200 V?
You need an interface (Modbus TCP)?
Do you want a plain text LCD display?
Do you need a separate life contact?
You want to comply with the German regulation "NELEV" and "EAAV"?
Then take a look at the new UFR1002IP!

The grid- and plant protection device UFR1001E monitors voltage and frequency in plants for own
generation of electricity. It complies with the requirements of VDE-AR-N 4120:2018-11, VDE-AR-N 4110:2018-11, VDE-AR-N 4105:2018-11, G98 and G99, ÖVE/ÖNORM E 8001-4-712:2009 and other standards for generators connected to the public grid.

The UFR1001E is a dual-channel device and thus one-fault-proof. The function of the output-relays and of the connected switches can be monitored with feed-back contacts. When a connected switch does not switch off, the UFR does not switch on again. When a switch does not switch on it makes 2 restarts and thus improves availability of monitored plant.

The limits are pre-set according to VDE-AR-N 4105-2011-08, VDE-AR-N 4105:2018-11 and other standards. They can be changed if required and be protected with a code and/or a seal.
With a 2-step test both channels can be tested individually and the triggering time of connected switches is measured.
The standby input allows a remote shutoff e.g. with a RCR.

• Under and overvoltage monitoring 15…520 V (with voltage transformers up to 1.000 V)
• For measurement up to 1,200 V: Relay for Voltage and Frequency Type UFR1002IP
• Measuring phase-neutral or phase-phase
• Monitoring of under- and overfrequency 45…65 Hz
• Monitoring of quality of voltage (10-minutes-average)
• Monitoring of vector shift 2…65°
• Monitoring of rate of change of frequency (ROCOF, df/dt) 0,100...5,000 Hz/s
• Monitoring of zero voltage U0 (ANSI 59v0)
• One-fault-proof with monitoring of connected switches (defeatable when using the integrated switch of pv and battery inverter acc. to DIN EN 62109 (VDE 0126-4))
• 2 automatic restarts at error
• Passive anti-islanding protection acc. to ch. 6.5.3 and app. D2
• Switching delay adjustable 0.05 … 300 s
• Switching back delay adjustable 0 … 6.000 s
• Preset values acc. to:
• VDE-AR-N 4105:2018-11 (Pr2), VDE-AR-N 4105-2011-08 (Pr1)
• VDE-AR-N 4110:2018-11 (PR11-14) and BDEW (Pr 3-6)
• G98 (G83/2) and G99 (G59/3) for Great Britain
• TOR producers type A, B, C, D for Austria
• Synergrid C10/C11 for Belgium
• NA/EEA-NE7 CH 2020 for Switzerland
• Alarm counter for 100 alarms (trip value, cause and rel. time stamp)
• Record of added times of alarms
• Input for standby with counter and recording of time
• Test button and simulation with measuring of switching-times
• Sealing. All values can be read-out when sealed
• Easy installation and programming with pre-set programs
• Housing for DIN-rail-mount, 105 mm wide, mounting height 66 mm
• Accessory: Installation frame ER6 for panel mount

Certificates

• Germany:
  Certificate of conformity Grid- and Plant protection acc. to VDE-AR-N 4105 2011-08 and 2018-11 "Plants for generation of own energy in low voltage grid"
  Certificate for component VDE-AR-N4110 and 4120
  Certificate of conformity Grid- and Plant protection acc. to BDEW-requirement "Plants for generation of own energy in medium voltage grid"
• Europe:
  Certificate of compliance DIN V VDE 0126-1-1
• Australia:
  approved Energex RED STD00233
• Austria:
  TOR Erzeuger A,B,C,D
  Certificate of compliance ÖVE/ÖNORM E 8001-4-712:2009-12, part A
• Belgium:
  approved Synergrid C10/C11
• Finland:
  EN 50549-1:2019, EN 50549-2:2019
• France:
  Certificate of conformity DIN V VDE 1256-1-1, VFR2013/VFR2014 ERDF-NOI-RES13E:2013-06
  DIN V VDE 1256-1-1, VFR2019
• Great Britain:
  Certificate of compliance G59/3:2013 and G83/2:2012
  G99/1-1+2+3:2018, G98/1-1+2:2018
• Ireland:
  Declaration of conformity EN 50549-1:2019, EN 50438:2013
• Japan:
  accepted by Tepco
• Netherlands:
  EN50549-1
• South Africa:
  Certificate of conformity NRS 097-2-1:2010 1.0
• Spain:
  RD1699:2011 / RD413:2014

Technical Data